Skip to content

Settings

Everything you can change while you play is in Longshot’s in-game menu: graphics, sound, gameplay and controls. Pick a starting point below, then look up any single setting in the list.

Open the menu

Input Open or close the menu Move around it
Keyboard F1, Insert or Esc Q and E (or Tab and Shift+Tab) switch tabs, the arrow keys choose and change, Enter changes too, Esc goes back
Controller Home, or Select and Start together (or click the touchpad on a DualShock 4 or DualSense) LB and RB (or the triggers) switch tabs, the D-pad chooses and changes, A changes and opens a page, B goes back
Mouse Click a tab or a row’s name, click the left or right half of a value to lower or raise it, drag a slider, turn the wheel to scroll, right-click to go back

F1 always opens the menu. Controls → Menu shortcut can take Esc or Insert off the list; without Esc, it only lets the mouse go. A and B are the buttons your Layout preset puts the Switch’s A and B on. Beside the rows, the help says what the row does and what the chosen value does.

Graphics tab with Quality preset selected, setting rows on the left, help on the right, and keyboard navigation along the bottom.

UI-only example from main f1f2dc5b (nightly 680) on Linux. The Custom values shown are illustrative, not recommended defaults.

Your choices are saved as you go, in longshot_options.ini: in %APPDATA%\Longshot when the launcher starts the game on Windows, so every version shares them, otherwise in the game folder (where the files go). A setting marked After a restart applies the next time the game starts: when you close the menu it asks whether to restart, with a list of what the restart applies (the settings changed, and the mods switched on the Mods tab). Later keeps the change for next time (and is not asked again until you change one of those settings, or a mod); Restart now starts the game again, and you lose any progress since your last save.

A row for something your PC can’t use is not shown: NVIDIA Reflex and AMD Anti-Lag 2 without a GPU and driver that have them, the DLSS rows where DLSS doesn’t run, the HDR rows while HDR is off.

Good starting points

A first start uses the Auto (this PC) quality preset. It picks settings from your graphics card and its video memory, then adjusts the render resolution during the first minute of play. If you change nothing, that is what you get. The Output resolution starts at the game’s own 2560x1440, or at your screen’s size where that is smaller (a Steam Deck’s 1280x800, a 1080p monitor), in your screen’s shape: a 2560x1080 ultrawide starts at 2560x1080 and a 2256x1504 laptop at 2256x1504, pixel for pixel. 2048x1152, marked “(reduced)”, is the game’s own smaller picture, lighter on the GPU.

Your PC Quality preset Upscaler and render resolution Frame rate cap Frame generation
Steam Deck, handheld, integrated GPU or a 4 to 6 GB card Auto (this PC) picks Minimum (4GB); Low (6GB) on a 6 GB card Game’s own, as the preset sets it, or AMD FSR 3.1 at Performance 60 Off
Most PCs (8 GB card) Auto (this PC) What Auto chooses: NVIDIA DLSS on an RTX card, AMD FSR 4 on an AMD RDNA 4 card (RX 9000) where the build has it, otherwise the game’s own 60 Off
A fast PC with a high-refresh monitor High (12GB) or Ultra (16GB+) DLSS or FSR 4 at Quality, or Native (DLAA or FSR 4 Native AA) for the sharpest picture 60 2x or Auto, up to your monitor’s refresh rate
  • Keep the frame rate cap at 60. Caps from 90 to 240 and Uncapped are experimental: some bosses and cutscenes still count frames and can misbehave. For smoother motion, use frame generation instead.
  • Frame generation adds frames between the game’s own. Motion is smoother, but the game itself doesn’t run any faster and input delay goes up a little. Auto matches your display’s refresh rate. NVIDIA Reflex and AMD Anti-Lag 2 cut the added delay.
  • DLSS and DLAA look softer than the game’s own upscaler: set Sharpness to around 80% with them.
  • Ultrawide and 4:3: leave Aspect ratio on your monitor’s shape (the default). The 3D fills the screen while the HUD keeps its 16:9 size with its corners at the screen’s edges (or in the middle, with HUD layout); movies stay in the middle.
  • HDR: turn on HDR (Expanded or Native), then set HDR peak brightness to your monitor’s.

Every setting

Each row of the menu, in the menu’s order, with its choices and its default. Labels on a setting say when it applies: after a restart, only on some GPUs or builds, only while HDR is on, or set for you by a quality preset.

91 settings.

GRAPHICS TAB

Quality preset

Sets the scaling rows and Shadow resolution for a GPU with that much memory. The Upscaler and Frame generation stay yours.

Choices Custom, Minimum (4GB), Low (6GB), Balanced (8GB), High (12GB), Ultra (16GB+), Auto (this PC)

Default Auto (this PC) on a first start; Custom in an options file from before it

GRAPHICS TAB

Resolution and upscaling

Aspect ratio

  • After a restart

The picture's shape: your monitor's own (the default: wider on an ultrawide, narrower on 4:3 or 16:10), the game's 16:9, or another your screen has. The Output resolution lists that shape's sizes.

Choices and requirements

The shapes your screen’s resolutions have, narrowest first (5:4, 4:3, 16:10, 16:9, 21:9, 32:9, …), your monitor’s own marked “(monitor’s)” (after a restart)

Default Your monitor’s

Output resolution

  • After a restart

The game's whole frame, HUD included, before it is scaled to the window. Docked only.

Choices and requirements

The Aspect ratio’s sizes: your screen’s resolutions and the common ones (1440p, 4K, 5K at 16:9; 1920x1200, 2560x1600 at 16:10; 3440x1440 at 21:9; …), and 2048x1152 (the game’s own reduced size, 80% of its 2560x1440, marked “(reduced)”) at 16:9; your screen’s own size is marked “(native)” (after a restart)

Default 2560x1440, the game’s own picture, or your screen’s size where it is smaller (a Steam Deck’s 1280x800, a 1080p monitor), at its own shape (a 2560x1080 ultrawide starts at 2560x1080, a 2256x1504 laptop at 2256x1504); Auto (this PC) leaves it as it is

Custom output size

  • After a restart

An Output resolution of your own, typed as width x height: your monitor's size, such as 3440x1440, 2560x1080 or 2560x1600. Each side is rounded down to a multiple of 8; a size the Output resolution offers is chosen there. Empty: none. Docked only.

Choices A size of your own, typed as <width>x<height> (after a restart)

Default None

Profile

  • After a restart
  • Set by quality presets

Runs the game as the console docked or handheld.

Choices Docked, Handheld (after a restart)

Default Docked; a quality preset sets it

Upscaler

  • Depends on GPU and build

What scales the 3D up to the Output resolution.

Choices and requirements

Game’s own, NVIDIA DLSS (only in builds with NVIDIA’s DLSS SDK, on NVIDIA RTX GPUs), AMD FSR 3.1 (every build, on GPUs it runs on), AMD FSR 4 (only in builds with FSR 4, on GPUs AMD’s files cover), Off (no upscaling), Intel XeSS (Windows, with Intel’s libxess.dll beside the game). NVIDIA DLAA, AMD FSR 4 Native AA and Intel XeSS Native AA are DLSS’s, FSR 4’s and XeSS’s Native, chosen on the Render resolution row

Default Game’s own; Auto (this PC) chooses DLSS or FSR 4 where they run, never XeSS

DLSS model

  • Where DLSS runs

Which of NVIDIA's DLSS networks draws the picture.

Choices and requirements

Transformer (K) (CNN (E) in its place on cards with less than 7 GB of video memory), Transformer 2 (M), Transformer 2 (L), NVIDIA default, CNN (E), CNN (F) (shown where DLSS runs; used by DLSS and DLAA)

Default Transformer (K); CNN (E) under 7 GB

DLAA before the bloom

  • With NVIDIA DLSS

Where NVIDIA DLAA smooths the picture: after the game's bloom and tone map, or before them. Changes at once.

Choices and requirements

Off, On: where NVIDIA DLAA smooths the picture, after the game’s bloom and tone map or before them (shown with NVIDIA DLSS; changeable with Render resolution Native (DLAA) only; changes at once; RX_VK_DLSS_PRE_BLOOM over it for one run)

Default Off

Render resolution

  • Set by quality presets

The share of the output the 3D is drawn at; the Upscaler fills in the rest.

Choices and requirements

Auto (the game’s own dynamic resolution), 100%, 75%, 67%, 50% (each with its size). With DLSS or FSR 4: Auto, Native (DLAA or FSR 4 Native AA: the 3D at full size), 92%, 83%, 75%, Quality (67%), Balanced (58%), Performance (50%), Ultra Performance (33%). With Intel XeSS the same stops, named by the XeSS mode each runs under: Native (XeSS Native AA), Ultra Quality Plus (92%, 83%), 75%, Ultra Quality (67%), Balanced (58%, 50%), Ultra Performance (33%). With FSR 3.1: Auto, 100% (its native AA), then the same as DLSS from 92%. With Off: Auto, 100%, 75%, 67%, 50%, 33%

Default Auto; a quality preset sets it

Sharpness

  • Set by quality presets

Sharpens the picture as it goes to the window, with any filter. Too much shows halos around edges.

Choices 0 to 100%, in steps of 10

Default 0%; a quality preset sets it

GRAPHICS TAB

Frame generation and latency

Makes frames between the game's own, for smoother motion, at a little input delay. Fast motion or camera cuts can show artifacts. With NVIDIA DLSS Frame Generation it goes up to what NVIDIA's runtime makes on this GPU: 6x on an RTX 50, 2x on an RTX 40.

Choices and requirements

Off, Auto (it shows who makes its frames: FSR 3.1 FG or Built-in FG), 2x to 8x; with DLSS FG up to what NVIDIA’s runtime makes on the GPU (6x on an RTX 50, 2x on an RTX 40)

Default Off

Frame generation by

  • While Frame generation is on

Who makes the frames at 2x and up. NVIDIA DLSS Frame Generation needs a temporal Upscaler (DLSS, DLAA or FSR) for the scene's depth and motion. Changes at once.

Choices and requirements

Shown while Frame generation is on. DLSS FG (NVIDIA DLSS Frame Generation: RTX 40 and newer, with a temporal Upscaler), FSR 3.1 FG (AMD FSR 3.1’s frame interpolation, from the scene’s depth and motion: any GPU), Built-in FG. DLSS FG is offered only where it runs; elsewhere the row has FSR 3.1 FG and Built-in FG, and its line at FSR 3.1 FG says why not DLSS FG (the log has NVIDIA’s answer). At DLSS FG, FSR 3.1 makes the frames DLSS FG does not (Frame generation’s Auto). At DLSS FG, the game’s own menus, movies and loading screens show only the game’s own frames (they have no Upscaler picture to make frames from): the row’s line and the FPS counter say DLSS FG paused. With an Upscaler that is not temporal, the built-in one makes the frames and the line says why. RX_VK_DLSS_FG=1 fixes the row at DLSS FG for a run. Changes at once

Default DLSS FG where it runs, else FSR 3.1 FG (an options file’s Auto from before is this default)

Limits frames rendered by the game. Generated frames are additional. Changes at once. Past 60 is experimental: the game keeps real time, but some cutscenes and bosses can misbehave (Gohma, the intro's narration). 60 is the safe choice. Uncapped: as fast as the PC can, still at real time; with V-Sync on, the display's refresh rate is the limit. 30 FPS always uses real-time game speed, even when Game speed is Per frame.

Choices 30, 60 (the console’s), 90, 120, 144, 165, 240, Uncapped (changes at once)

Default 60

NVIDIA Reflex

  • NVIDIA GPUs only

NVIDIA GPUs: each frame starts as late as it can, for less input delay. With frame generation too: it paces the game's frames.

Choices Off, On, On + Boost (shown only on NVIDIA GPUs with VK_NV_low_latency2)

Default Off

AMD Anti-Lag 2

  • AMD GPUs only

AMD GPUs: each frame starts as late as it can, for less input delay. With frame generation too: it paces the game's frames.

Choices Off, On (shown only on AMD GPUs with VK_AMD_anti_lag)

Default Off

GRAPHICS TAB

Screen

Fills the whole screen with the game, without the window's border. The same as F11.

Choices Off, On (the same as F11)

Default Off

Choose the screen used by Fullscreen, F11 and Alt+Enter. Auto uses the window's current monitor.

Choices and requirements

Auto (current monitor), or a named connected screen. While windowed, chooses the next fullscreen destination; while fullscreen, moves the game. An unavailable choice is retained with a temporary fallback.

Default Auto (current monitor)

Whether a frame waits for the display's refresh before it is shown. Changes at once.

Choices Auto, On, Off

Default Auto

Window scaling filter

  • Set by quality presets

How the finished picture is scaled to the window, when its size differs from the Output resolution.

Choices Off, Catmull-Rom, Lanczos (shows “Not needed (window = output)” while the window is the Output resolution’s size)

Default Off; a quality preset sets it

Filters the finished picture, including the game's HUD, after window effects. Longshot's menu and overlays stay clean. Changes at once; quality presets leave it alone.

Choices Off, Lottes aperture grille, Lottes consumer TV, Hyllian Fast, zfast CRT (changes at once; Native HDR bypasses it)

Default Off

CRT lines

  • With a CRT filter on

Virtual CRT raster, not Render resolution. Capped at half the destination height (at least one line); width follows its aspect. Non-integer scaling can cause moire.

Choices 240, 480, 720 virtual lines (shown with a CRT filter on; changes at once; capped at half the destination height)

Default 240

With the Aspect ratio at the monitor's shape: the pause, item and map menus, and what shows beside them. Loading screens and pre-rendered movies, which draw no world either, get the same sides. Changes at once.

Choices Full width; Centred, blurred sides; Centred, black bars (with the Aspect ratio at the monitor’s shape)

Default Centred, blurred sides

Where the gameplay HUD sits. Custom starts at the screen's edges and lets you place and resize its groups. Changes at once.

Choices Screen’s edges, Middle 16:9 or Custom. HOS_WIDE_UI, when set, overrides the choice

Default Screen’s edges

Hearts and magic horizontal

  • Custom HUD layout without a HOS_WIDE_UI override

Move left or right as a share of the picture's width.

Choices From −15% to +15% of the picture’s width (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Hearts and magic vertical

  • Custom HUD layout without a HOS_WIDE_UI override

Move down or up as a share of the picture's height.

Choices From −15% to +15% of the picture’s height (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Hearts and magic size

  • Custom HUD layout without a HOS_WIDE_UI override

Resize the hearts and magic together.

Choices From 75% to 125% (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 100%

Action and item buttons horizontal

  • Custom HUD layout without a HOS_WIDE_UI override

Move left or right as a share of the picture's width.

Choices From −15% to +15% of the picture’s width (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Action and item buttons vertical

  • Custom HUD layout without a HOS_WIDE_UI override

Move down or up as a share of the picture's height.

Choices From −15% to +15% of the picture’s height (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Action and item buttons size

  • Custom HUD layout without a HOS_WIDE_UI override

Resize the action prompts and equipped item buttons.

Choices From 75% to 125% (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 100%

Minimap horizontal

  • Custom HUD layout without a HOS_WIDE_UI override

Move left or right as a share of the picture's width.

Choices From −15% to +15% of the picture’s width (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Minimap vertical

  • Custom HUD layout without a HOS_WIDE_UI override

Move down or up as a share of the picture's height.

Choices From −15% to +15% of the picture’s height (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 0%

Minimap size

  • Custom HUD layout without a HOS_WIDE_UI override

Resize the minimap during gameplay.

Choices From 75% to 125% (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default 100%

Reset HUD placement

  • Custom HUD layout without a HOS_WIDE_UI override

Restore the three HUD groups to their default positions and sizes.

Choices and requirements

Restores the three groups to their usual positions and sizes (shown with HUD layout set to Custom and no HOS_WIDE_UI override)

Default —

GRAPHICS TAB

HDR

HDR10 out on an HDR display (Windows: Use HDR on in the display settings). Expanded: the game's SDR picture, its white at the paper white and its highlights up to the peak. Native: the game's own HDR, told the display's peak and paper white.

Choices Off, Expanded, Native (the game’s)

Default Off

HDR paper white

  • While HDR is on

How bright the picture's white is with HDR on. Around 200 for a normal room; higher in a bright one.

Choices 80 to 400 nits, in steps of 10 (while HDR is on)

Default 200 nits

HDR peak brightness

  • While HDR is on

The brightest highlights with HDR on: set it to your display's peak brightness.

Choices 400 to 4000 nits, in steps of 100 (while HDR is on)

Default 1000 nits

HDR contrast

  • While HDR is on

The HDR picture's contrast around mid grey, as the RenoDX HDR mods grade it: above 100% deeper shadows and brighter highlights, which ease into the peak brightness; below it flatter. With Native the game's own HDR picture is graded too, under the peak brightness the game is told.

Choices 50% to 200% around mid grey, in steps of 5 (while HDR is on)

Default 100%

HDR tone mapper

  • With HDR on Native

With Native, how the game's scene meets the peak brightness. Vanilla: the game's own curve. PsychoV35: RenoDX's tone mapper, the same mid grey with highlights that roll off into the peak and keep their colour.

Choices and requirements

Vanilla (the game’s curve), PsychoV35 (RenoDX’s; with HDR set to Native). Compatible DLSS/DLAA, FSR 4/native AA and shared-chain FSR 3.1 upscaling run automatically; RX_VK_PSYCHOV35_DLSS=0 disables that compatibility route. Off and the spatial/FXAA TAAU replacement support PsychoV35 directly. FSR 3.1 FG remains separately opt-in and 2x only; legacy own-input FSR upscaling remains unsupported

Default Vanilla

GRAPHICS TAB

Accessibility

Recolours the picture for red-green or blue-yellow colour vision deficiency. Changes apply immediately.

Choices Off, Protan (red-green), Deutan (red-green), Tritan (blue-yellow). Changes apply immediately.

Default Off

GRAPHICS TAB

Detail

Keeps textures sharp on surfaces seen at a slant, such as the ground ahead: higher is sharper in the distance, for a little GPU time. Game's is the console's own (1x or 2x).

Choices Game’s, 2x, 4x, 8x, 16x

Default 16x

The size of the sun's shadow maps: higher keeps the shadows of thin things near you, such as chains, fences and leaves, smooth instead of stair-stepped, for more video memory and a little GPU time. Highest also makes them shimmer less while the camera moves. Applies at once.

Choices and requirements

Auto (for the card’s memory), Game’s (1600), High (2200), Highest (3072): the sun’s shadow maps, applies at once; Highest also keeps the nearest shadows from shimmering as much

Default Auto

GRAPHICS TAB

GPU and memory

GPU device

  • After a restart

Which graphics card the game runs on.

Choices Auto, or each graphics card by name (after a restart)

Default Auto

AUDIO TAB

Audio

How loud the game plays. The game's own sound settings and Windows' volume still apply.

Choices 0 to 100%, in steps of 5

Default 100%

Silences the game while another window has the focus. The sound comes back when you switch to the game.

Choices Off, On

Default Off

Where the game plays sound. Changes apply without restarting the game.

Choices Default or a named Windows playback device; applies live

Default Default

Speaker layout

  • After a restart

The speakers the game mixes for. Mono/Stereo changes live on stereo output; channel layout changes need a restart.

Choices Auto, Stereo, 5.1, Mono (layout changes after a restart; Mono/Stereo live on stereo output)

Default Auto

What the instrument hears when the game's microphone option is on (playing an instrument, or humming).

Choices Off, Default, or each microphone by name

Default Default

Adjust capture for Longshot only; system volume is unchanged. Use the microphone test to see live levels while adjusting gain. Changes apply to new samples.

Choices Software input level, 0–400%; applies to new samples without changing system volume

Default 100%

Start or stop microphone capture. No playback or audio files. You can adjust Microphone gain while testing. Leaving Audio, closing the menu or selecting Off stops the test; the game can still use the mic.

Choices Start/stop capture; live levels appear in the help box for Test microphone and Microphone gain

Default Stopped

GAMEPLAY TAB

Gameplay

Frames per second in the top right corner, and as much more as you choose.

Choices Off, FPS, Frame time, Graph, Breakdown, Dev

Default Off

The corner the FPS counter shows in. While this menu is open it shows at the top right.

Choices Top right, Top left, Bottom right, Bottom left

Default Top right

How large the FPS counter is drawn. Auto grows with the window, as the menu does; Small, Medium and Large keep one size whatever the window, the size Auto has in a 720p, 1080p and 1440p window.

Choices Auto, Small, Medium, Large

Default Auto

Which lines the FPS counter's Dev level shows, and whether the version and hardware show at every level.

Choices and requirements

Opens the FPS counter details page: Version and hardware at every level (Off, On; Off), then a line each of the Dev level (VRAM, Textures, Draws, Dispatches, Render passes, Draws skipped, Texture uploads, Pipelines built, GPU slot waits, Queue submits, Write-backs) and the CPU and GPU lines (Off, On; On)

Default Version and hardware off, every line on

How large this menu, the FPS counter and the start-up screen are drawn.

Choices Small, Medium, Large

Default Medium

How the game keeps time when it runs below 60 fps. 30 FPS always uses real-time game speed, even when Game speed is Per frame.

Choices Per frame, Real time

Default Real time

How much of the world you see: 100% is the original view. Higher is wider, lower is closer. Changes apply at once during gameplay. Cutscenes keep their own view.

Choices 50% to 150%, in steps of 5; applies immediately during gameplay

Default 100% (original)

How fast the letters of dialogue and other messages appear.

Choices Normal, 2x, 4x, Instant

Default Normal

How large the text of dialogue, the companion and signs is drawn.

Choices Original, 110%, 125%, 150%, 175% (dialogue, the companion and signs)

Default Original

Skip title screen

  • After a restart

Starts a launch with the most recent saved game: presses A on the title screen, its file list and its Yes as soon as the game waits on each. Does nothing until the game has a save.

Choices Off, On (after a restart)

Default Off

Game language

  • After a restart

The game's own language, its text.

Choices The game’s 16 languages, each by its own name (after a restart)

Default language.txt’s, else English (US)

The language of this menu.

Choices and requirements

Auto (the game’s language), or English, Português (Brasil), Español (Latinoamérica), Español (España), Français, Deutsch, Italiano, Nederlands, Polski, Русский, 日本語, 한국어, 简体中文, 繁體中文

Default Auto

Skips the new-game opening (the story movie and the opening wake-up scene) and leaves later cutscenes, the first dungeon meeting, and the title screen alone.

Choices Off, On (skips the new-game opening: the story movie and the opening wake-up scene; later cutscenes and the title screen stay)

Default Off

Saves what an issue needs in a new folder, bug-reports in the game folder: report.txt with the issue form's answers (this version, where you are, your graphics card and driver, CPU, RAM and system, the options and switches you changed), the logs of this run and the last one, and a picture of the game. Your user name and home folder are taken out of them. No saves or game files go in, and nothing is sent.

Choices Saves a report into a new folder in bug-reports

Default —

CONTROLS TAB

Controls

Whether the controller plays the game while another window has the focus.

Choices Off, On

Default Off

How the captured mouse turns the camera.

Choices As the stick, Native, Off

Default As the stick

Stops the camera gradually turning toward the direction you move, useful with native mouse look. Off keeps the game's standard behavior. Manual camera controls and recentering still work.

Choices Off, On

Default Off

How far the camera turns for a mouse movement, with either Mouse camera: at 1.00 native look turns 0.1 degree a count. The - and = keys change it in game too.

Choices 0.10 to 5.00, in steps of 0.10

Default 1.00

Inverts horizontal look (left/right) on the right analog stick.

Choices Off, On

Default Off

Inverts vertical look (up/down) on the right analog stick.

Choices Off, On

Default Off

How fast the right stick turns the camera, in percent of the game's own speed; the camera keys too, and the mouse with Mouse camera As the stick. The game's own camera speed setting still applies.

Choices 50% to 400%, in steps of 25

Default 100%

How far a stick moves from center in any direction before the game sees it. Lower for a precise stick, higher for one that drifts. The game's own dead zone still follows.

Choices Default (24%), 5%, 10%, 15%, 20%, 30%

Default Default (24%)

How the controller vibrates. Auto plays the best it can: a DualSense its voice coils, a Switch controller and an Xbox controller RenHDrum's HD rumble, a Steam Controller (2026) its grips, every other controller its motors. Basic plays the motors on every controller. Off stops it.

Choices Auto, Basic, Off

Default Auto

How strongly the controller vibrates, in percent of what the game asks for. A change gives a short buzz at the new strength.

Choices 25% to 200%, in steps of 25

Default 100%

A short buzz on the controller used last. The value says what plays its vibration now.

Choices an action: Confirm buzzes the controller used last; the value says what plays it

Default Motors

A DualSense also taps its speaker and kicks back on L2 and R2 while you hold them, from the game's vibration, with deeper heavy hits. Off: its fine haptics alone, as before.

Choices On, Off

Default On

Layout preset

  • On the Controls page

Which face button is which. Binding one yourself on the Controls page makes it Custom.

Choices Default (A on right), Xbox / PC, Swap Face, the supported console Pro; Custom once you bind a button yourself (on the Controls page)

Default Default (A on right)

Button prompts

  • After a restart
  • On the Controls page

The button icons the game shows, in its texts and menus: those of this controller, for the buttons your controls put each action on.

Choices and requirements

Auto, Original console, Xbox, PlayStation 4, PlayStation 5, Steam Deck, Keyboard (on the Controls page; changes at once where the game allows it, else after a restart)

Default Auto

Motion controls: aiming with the controller's gyroscope, its sensitivity and its inverts.

Choices and requirements

Opens the Motion page: Motion controls (Off, On; On), Motion sensitivity X (10% to 600%) and Y (10% to 300%, in steps of 10; 100%), Invert motion X and Y (Off, On; Off), Motion deadzone (Low, Standard, High; Standard)

Default —

How the Walk key makes Link walk with the movement keys: while it is held, or from one press to the next. It is Caps Lock unless the Controls page changes it.

Choices Hold, Toggle

Default Hold

How far the movement keys tilt the stick while Link walks, in percent of the whole way. Controllers, the mouse and the camera keys are not changed.

Choices 15% to 90%, in steps of 5

Default 45%

Hold Shift, or click and hold the left stick, while moving: Link runs without rolling, talking or picking things up, and moves as before once you let go. Turning it on changes your controls: Shift moves from B to Sprint (B goes to V) and the left stick's press from LS to Sprint. Turning it off puts them back. Controls you rebound yourself are left alone; the Controls page's Sprint line rebinds it.

Choices and requirements

Off, On (Link runs while you move and hold Shift or the left stick pressed in, without rolling; turning it on moves Shift and the left stick’s press to Sprint)

Default Off

The layout preset, the button prompts, and which gamepad button and which keys press each of the console's buttons.

Choices Opens the Controls page

Default —

Which keys open and close this menu. F1 always does; F1 only leaves Insert free for an overlay. With Esc, Esc opens it too, as a PC game's pause menu (open, Esc still goes back a page or closes it).

Choices Insert or F1; F1 only; Insert, F1 or Esc

Default Insert, F1 or Esc

Which of the controller's buttons opens and closes this menu, so that no keyboard is needed: Home, or one of the back buttons of a pad that has them (GL and GR on a the supported console Pro Controller). None leaves all of them to the game.

Choices None, Home, Back left (GL), Back right (GR)

Default Home

Which key switches between the full menu and the compact bar (or opens directly to the compact bar when held with the menu shortcut).

Choices Right Shift, Right Ctrl

Default Right Shift

NFC TAB

NFC

Which of your NFC tags to use: the files of your NFC folder, by their names. The Longshot Launcher's NFC page adds and removes them; dumps of your own figures (.bin, or a Flipper Zero's .nfc).

Choices The tag files of your NFC folder, by their names

Default The first

Holds the chosen NFC tag to the reader, as tapping the figure on the controller does. It stays there until the game has read it.

Choices Holds the chosen tag to the game’s reader

Default —

Takes the NFC tag off the reader.

Choices Takes it off the reader

Default —

Reads a tag you own with a the supported console Pro Controller's reader (over USB) and saves it in your NFC folder, so it can be tapped from this tab from then on. The tag itself is not changed.

Choices Reads a tag you own with a the supported console Pro Controller (USB) and saves it in your NFC folder

Default —

For a live preview while adjusting Custom HUD placement, use the compact menu. Right Shift switches to it by default.

The Debug tab is for testing. Its Debug tools (or HOS_OOT_CHEATS=1 in longshot_env.txt) add flight, a free camera, teleport, the inventory and the other tools below the row. Its Developer rows are workarounds to try when a helper asks you to.

About some settings

  • Colour vision correction: in Graphics → Accessibility, choose Off, Protan (red-green), Deutan (red-green) or Tritan (blue-yellow). The setting takes effect immediately and is remembered. It shifts colour differences while preserving brightness. The three modes are fixed presets and their usefulness varies by player and scene.

  • Quality preset sets Render resolution, Window scaling filter, Sharpness, Frame pacing, Game speed, Profile and Shadow resolution for a card with that much memory. It leaves the Upscaler and Frame generation as you chose them: with DLSS, FSR 3.1 or FSR 4, the preset’s resolution becomes their nearest mode. Changing most other rows yourself sets it to Custom.

  • Auto (this PC) chooses for the PC it runs on: the memory tier from the card’s video memory (Minimum on an integrated GPU, a Steam Deck or a card without mesh shaders), DLSS on an NVIDIA RTX card or FSR 4 on an AMD RDNA 4 card (RX 9000) where the build has them. In the first minute of play it lowers the Render resolution a step while frames are missed with the GPU busy, or raises it while the cap holds with the GPU under half busy: at most two steps. It chooses again when the card or the screen changes; longshot_log.txt’s Auto (this PC) lines say what it chose and why.

  • The scaling rows, in the picture’s order: Output resolution is the size of the whole frame, HUD included. The Upscaler fills it from the 3D, whose share is the Render resolution. Off is no upscaler at all, not even the game’s own: the fastest choice, with jagged edges. The Window scaling filter then scales the frame to your window, and Sharpness sharpens it. For the sharpest picture, set the Output resolution to your screen’s size: the filter row then shows “Not needed (window = output)”. NVIDIA DLSS, AMD FSR 4 and Intel XeSS need files of their makers’ (optional upscalers); AMD FSR 3.1 is in every build.

  • Aspect ratio lists the shapes of your screen’s resolutions, your monitor’s own marked “(monitor’s)”, and Output resolution that shape’s sizes, your screen’s own marked “(native)”. A size larger than your screen is drawn at that size and scaled down. For a size the menu doesn’t offer, type it in Custom output size (<width>x<height>, each side a multiple of 8, from 640x360 up to 5120x2880’s pixels, between 5:4 and 48:9); the menu says why it refuses one. For three 16:9 monitors, use 5760x1080 or 7680x1440 with a window that spans all three.

  • Frame generation by chooses who makes the extra frames: DLSS FG (NVIDIA DLSS Frame Generation, RTX 40 and newer, the default where it runs: up to 6x on an RTX 50, 2x on an RTX 40), FSR 3.1 FG (AMD’s, on any GPU, the default elsewhere) or Built-in FG. Frame pacing (Debug tab) shows those frames at an even interval: less stutter, up to a frame of delay. Present queue (Debug tab) can make them more even with V-Sync Off on some cards, but lost the GPU on others: if the game then crashes before you reach the menu, put RX_VK_PRESENT_QUEUE=0 in longshot_env.txt, turn the row off and remove the line.

  • Game frame rate cap limits the frames the game renders: with a cap of 60 and Frame generation at 2x, the output reaches 120 FPS. A cap above 60 is experimental: the game keeps real time, but some cutscenes and bosses count frames and can misbehave. Uncapped renders as fast as the PC can; with V-Sync on, the display’s refresh still holds it.

  • V-Sync: Auto is mailbox where the driver has it (no tearing, no wait), else On, or Off on Windows. On waits for each refresh; Off shows each frame at once and can tear.

  • HDR: Expanded expands the game’s SDR picture; Native is the game’s own HDR, with the HDR tone mapper row. On Windows, if the game stays SDR, the HDR row’s help says why (HDR stays SDR).

  • CRT filter adds scanlines and a phosphor mask to the finished SDR picture, HUD included; CRT lines is its virtual line count. Native HDR leaves it out.

  • Anisotropic filtering keeps the ground sharp at a slant; 16x costs little on most cards, and Game’s is the console’s own. Shadow resolution sets the sun’s shadow maps: Auto picks by the card’s memory (the game’s 1600 up to 6 GB, High at 8 GB, Highest from 12 GB). On Highest the nearest shadows shimmer less while the camera turns or Link walks: the map near Link stays put in the world instead of following the view. The steady fit is a little coarser than the game’s own fit standing still, so below Highest the game’s fit is kept (developer switches).

  • GPU device matters on a PC with more than one graphics card: Auto prefers a dedicated one. The card you choose is remembered as that card, not its place in the list.

  • Threaded rendering: On draws the picture on threads of its own (a render thread and a recorder thread) while the game goes on to its next frame, for a higher frame rate on a processor with cores to spare; it can still show flashes. Auto counts the processor’s cores for the game: both threads with 6 or more, the render thread alone with 4 or 5, Off with fewer. It applies after a restart.

  • Robust buffers drops a read past a buffer’s end instead of stopping the GPU: Auto is on, on every card. ASTC as RGBA8 is the AMD texture workaround. Intel shader compiles (Intel graphics on Windows): One at a time is the safe choice; Side by side builds faster on many cores but can crash in Intel’s driver. Auto is side by side on the Arc B-series with driver 101.9154 or newer.

  • FPS counter has five levels: FPS; Frame time (with the 1% low, green at the cap’s rate, amber under it, red under two thirds of it); Graph (the last 4 seconds, red marks over frames that took twice the cap’s time); Breakdown (where each frame’s time went: the game, the renderer, the waits); Dev (the renderer’s own numbers, for bug reports). FPS counter details turns the Dev level’s lines on or off.

  • Game speed: Per frame slows the game whenever it is below 60 fps; Real time keeps normal speed down to 15 fps.

  • Field of view changes the gameplay camera’s angle: 100% is the game’s. Cutscenes, the HUD and movies keep theirs.

  • Skip title screen loads your most recent save at the start, once you have saved once. It presses A for you on the title screen, its file list and its Yes, each as soon as the game waits there, and on nothing else; the game itself loads the save. With no save yet the title screen stays, so a new game can start.

  • Game language writes language.txt in the game folder, read at the next start. Menu language is this menu’s: its translations are machine-made, and corrections are welcome.

  • Bug report saves what a report needs in a new folder (what is in it).

  • Speaker layout: Auto is 5.1 when the output device has 5.1 speakers, else stereo. Mono puts both channels in both ears. Microphone is what the game hears when its own microphone option is on; Test microphone shows its level.

  • Mouse camera: Native turns the camera with the mouse one to one, as in a PC game; As the stick uses the mouse in the right stick’s place (- and = change the sensitivity in game); Off leaves the mouse out. Disable camera centering stops the game turning the camera toward your movement.

  • Camera speed is how fast the right stick and the camera keys turn the camera, in percent of the game’s own.

  • Stick dead zone: how far a stick moves before it counts. Lower it for a precise stick, raise it for one that drifts.

  • Vibration: Auto plays the best each controller can (a DualSense its voice coils, on a cable or over Bluetooth; an Xbox One or Series controller all four motors; a Switch Pro Controller its HD rumble; a Steam Controller (2026) its grips, still experimental; any other its two motors); Basic plays the two motors on every controller. Test vibration says what plays the controller you used last. DualSense HD Haptics (on) adds the DualSense’s speaker and its L2/R2 to that: soft taps from the speaker, and a kick in a trigger you hold when something hits.

  • Motion (a page on the Controls tab): the gyroscope aims where the game uses motion, with Switch Pro controllers, pads in Switch mode, DualSense and DualShock 4. Set the pad down for a second if the aim creeps.

  • Walk mode and Walk speed: while the Walk key is held (Caps Lock unless you change it), the movement keys tilt the stick only Walk speed of the way. With Toggle, one press walks and the next runs.

  • Sprint (Controls tab, off by default): Link runs the game’s own run, the one after a roll while A stays held, without the roll. Hold Shift while you move, or on a controller hold the left stick pressed in; let go and he moves as before. He runs past people, signs and pots without talking, reading or picking up; tap A to roll or act as usual. Sprint is disabled while the instrument is waiting for a note. Turning the row on moves Shift from B to Sprint (B goes to V, when no control has V) and the left stick’s press from LS to Sprint; turning it off puts them back. Controls you rebound yourself are left alone, and the Controls page’s Sprint line rebinds it.

Controls

Use a controller, or the keyboard and mouse. On the keyboard, W A S D move (hold Caps Lock to walk), the arrow keys (or I J K L) turn the camera, and E is A (it selects New Game on the title screen).

Toggle HUD starts unbound. Assign a key or controller input on the Controls page to hide or show the gameplay HUD during the current session. The dungeon’s small-key count follows the minimap’s placement and visibility. The full map stays available with its own small-key count and the Boss Key icon when owned. While assigned, the shortcut takes priority over any gameplay action on the same key or button.

Change a binding on the Controls tab’s Controls page: choose a row and a column (Gamepad or Keyboard), press Enter (or the bottom face button), then the new button or key. Esc cancels, Delete clears it, and Reset to defaults puts them all back. A gamepad button taken from another Switch button swaps with it. The Toggle column makes a Switch button stay held from one press to the next. The five note rows (the instrument’s notes) are unset until you bind them to inputs of your own.

Mouse in the game’s menus (Windows): the title screen, the pause menu, the map and the save dialogs free the mouse. Point at an entry and left-click to choose it (A), right-click to go back (B); the wheel turns the pause menu’s pages, scrolls lists and zooms the map, and dragging pans the map.

Rumble: a Switch Pro Controller plays the game’s HD rumble as the console does (on Linux it needs Steam’s udev rules, the steam-devices package on most distributions). A third-party pad in Switch mode that turns it into weak rumble or none gets the plain motor rumble with HOS_HD_RUMBLE=0 in longshot_env.txt.

DualSense haptics: a DualSense on a USB cable plays the game’s own fine vibration on its voice coils, through RenHDrum, which the Longshot Builder puts beside the game. Without it, the pad gets its motors. With DualSense HD Haptics on (the default) its speaker taps and its triggers kick back too; turn it off for the voice coils alone.

The supported console’s Pro Controller over USB (Windows): the game reads it itself, with its motion sensor and rumble. Choose its own Layout preset for its buttons and icons; its Home button opens this menu (Controller menu button). Close Steam and any bridge program first: only one program can have the controller. Not over Bluetooth.

NFC tags: where the game asks for a figure’s tag, the menu’s NFC tab gives it one. The tags are dumps of tags you own (.bin, or a Flipper Zero’s .nfc) in %LOCALAPPDATA%\Longshot\nfc on Windows or ~/.local/share/longshot/nfc on Linux; the Longshot Launcher’s NFC page adds and removes them. Choose one in NFC tag and press Tap tag. A real tag held on that Pro Controller over USB is read too, and Scan tag on controller saves one. No tag is ever written.

Writing the controls in longshot_options.ini yourself
pad_a=0
key_a=69,13
toggle_a=0

pad_<button> is a gamepad input by position: 0 bottom face button, 1 right, 2 left, 3 top, 4 Select or Back, 5 Home, 6 Start, 7 and 8 the stick presses, 9 and 10 the shoulder buttons, 11 to 14 the D-pad (up, down, left, right), 15 and 16 the triggers, -1 none. key_<button> is one or two Windows key codes in decimal (69 is E, 13 Enter), 0 none; the mouse’s buttons are 1 (left), 2 (right), 4 (middle), 5 and 6 (side buttons). The buttons are a b x y l r zl zr plus minus ls rs left up right down; for keys only, the left stick’s and the camera’s directions and walking: move_up move_down move_left move_right cam_up cam_down cam_left cam_right walk; and the five notes, which also take a pad_ line: note_l note_r note_a note_y note_x; and sprint, which takes both lines (none by default; the Sprint row gives it Shift and the left stick’s press). A button the file leaves out keeps its default. toggle_<button>=1 turns that button’s Toggle on (not for plus, minus, the stick directions, walk, the notes or sprint).

Change one thing at a time

When something looks or runs wrong, change a single setting and compare the same place in the game. To report a performance problem, follow Report slow performance.